The Drymatic’s unique operation is based upon it’s evaluation of the humidity and temperature of the room to be dried and then operating in the mode that provides maximum drying effect.
When initially switched on, the machine operates in ‘re-circulation’ mode, taking air from within the room being dried and continually re-heating it until pre-set temperature and humidity levels have been reached. These settings can either be determined by the technician or the default settings of the machine.
It then switches automatically to ‘exhaust mode’, where powerful internal fans extract the air from the room, replacing it with an equal amount of fresh and pre-heated air from an unaffected area (which is generally indoors) to ensure an on-going optimised drying environment.
Adding controlled heat to the environment speeds up the drying process by promoting evaporation of moisture from the wet structure and contents. Increasing the ambient temperature allows the air to take on a higher water vapour content, which is then removed out of the property.
Within limits defined by the user, the Drymatic will monitor and adjust the room’s environment, constantly optimising and exchanging the moist air with warm, dry air in a controlled manner to remove odours and ensure a faster, fresher and more efficient drying environment.
Simple to use controls allow for quick installation. Displays clear status information from the on board control panel. Automatic kWh metering that does not lose memory in the event of a power failure. On-Board SMS Text Messaging Facility can communicate with a drying technician to notify them of any important events during the job such as: Machine powered down, Blocked Filter, Room Dry, Wall Sensor Network Fail (Low Battery etc) (SMS Function not included with base system)