Add Speed and Versatility to Traditional Drying Systems
New E-TES plugs into a 240-volt stove outlet and lets you use TES' advanced drying technology as a supplement to traditional air movers* and dehumidifier systems on large losses or as a stand alone drying system on small jobs.
Because E-TES won't overwhelm a house with heat, dehumidifiers will be able to keep up. In fact, when E-TES is operating, the additional heat will make them work even more effectively.
E-TES is a perfect complement to traditional systems on large losses. Use E-TES for the tough challenges like attics, crawl spaces, wood floors, etc. Or, use it all by itself to dry small one and two room losses. Plug into any dryer outlet (220-240 volt) or use the adapter to plug into an electric stove outlet.
- Add any centrifugal blower
- Turn it on and dry with hot, dry air
- Dry carpet, pad, and walls all at the same time
- Dry inside walls and ceilings with hot, dry air
- Dry hardwood floors and crawl spaces
Features
- 50 foot Heavy Duty 30amp GFCI (Ground Fault Circuit Interrupter) Power Cord with 3-prong dryer outlet
- Includes adapter for 4-prong outlets
- Adapters available for 3-prong and 4-prong Range outlets
- Panel Lights indicate power and safety switch status
- Safety Switches include:
- Air Flow Switch
- Dual Hi-Limit Temperature Switches
- Safety Shutdown Temperature Switch
Specifications
- 21,000 Btu 240vac Electric Model
- Height: 49cm
- Length: 61cm
- Width: 51cm
- Weight: 18kg
- Heater watt rating: 6200 watts
- Maximum Amp Draw: 25.83amps
- Five year housing warranty
- One year component warranty
*Air mover sold separately.
Find out more about TES™ at www.TESDryingSystem.com
|
What People Are Saying... |
|
"I just used my e-tes in conjuction with the octi-dry on a job. We had a L&P wall covered with paper. The base was old 1x6 pine painted white. Rather than risking seperation, we opted to drill the base and patch later. We injected the wall and guess what... dry in a day!
I might just have to get a big generator and some more of these dogs... cuz they sure do hunt!"
Craig Lindquist
Viking Cleaners |
|
"I've used my E-Tes in conjunction with my Tes as well as on the smaller floods alone. My last E-tes flood was a 13x13 bedroom and a 3x8 hallway. I used my water claw to extract and the set up was really fast. The water came in a window 4 feet off the basement floor. The wall under the window was wet up to 400 on my MMS.&nsp; It had two layers of wall paper on it so I wasn't sure it would dry without tearing it out. I decided to pull the base and see what the E-Tes could do. After 24 hours all the carpet, pad, and concrete floor were dry, but still really wet on the wall. I came back the next day 40 hours into the process expecting to tear out the wall and it was completely dry.
I was able to contain the heat to the specific area by closing doors. I opened the window about 3 inches and the dry Utah air aided in the process. Homeowner and Insurance adjuster were thrilled. In and out with everything put back together in 4 days.
I anticipate using my E-Tes more than my Tes because most of my floods are one to two rooms. I've already used it at least 5 times and all were dried in 40 hours or less. Now I have the ability to use heat on all of my clean water floods."
Judd Hanks
Nautica Carpet Care |
